mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. m2 series 5x7 mm, 3.3 volt, hcmos/ttl compatible output, clock oscillator parameter symbol min. typ. max. units condition/not es frequency range f 1.0 135 mhz see note 1 operating temperature t a (see ordering information) storage temperature t s -55 +125 c frequency stability ? f/f (see ordering information) aging 1 st year 3 ppm thereafter (per year) 2 ppm input voltage vdd 3.0 3.3 3.6 v input current idd 10 ma 1.000 to 20.000 mhz 20 ma 20.001 to 50.000 mhz 30 ma 50.001 to 67.000 55 ma 67.001 to 135.000 mhz standby current 10 a q output type output type hcmos/ttl compatible load 2 ttl or 15 pf see note 2 symmetry (duty cycle) (see ordering information) ? vdd logic 1 level voh 90% vdd v hcmos load vdd -0.5 v ttl load logic 0 level vol 10% vdd v hcmos load 0.5 v ttl load output current 4 ma rise/fall time tr/tf see note 3 6 ns 1.500 to 50.000 mhz 4 ns 50.001 to 80.000 mhz 2 ns 80.001 to 135.000 mhz input logic 1 or floating: output active standby/tristate function input logic 0; output disables to high-z start up time 10 ms electrical specifications random jitter rj 4 10 ps rms 1-sigma mechanical shock per mil-std-202, method 213, condition c (100 gs, 6 ms duration, ? sinewave) vibration per mil-std-202, method 201 & 204 (10 gs from 10-2 000 hz) hermeticity per mil-std-202, method 112, (1x10 -8 atm. cc/s of helium) thermal cycle per mil-std-883, method 1010, condition b (-55 c to +125 c, 15 min. dwell, 10 cycles) solderability per eiaj-std-002 environmental soldering conditions see solder profile, figure 1 1. consult factory for availability of higher fre quencies. 2. hcmos load - see load circuit diagram #2. con sult factory with nonstandard output load requireme nts. 3. rise/fall times are measured between 0.5 v and 2.4 v with ttl load, and between 10% vdd and 90% v dd with hcmos load. note: a capacitor of value 0.01 f or greater between vdd and ground is recommended. pin connections revision:6-18-10 denotes pin 1
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. mtronpti lead free solder profle
|
